High-performance protection

Equipped with microprocessor-controlled On Line Performance technology, the E3 Performance range offers perfect protection to IT networks and loads. It supplies sinewave current, and its high output power factor (0.9) provides appropriate protection to servers and other IT equipment. The E3 Performance UPS guarantees uninterrupted service and the  safeguarding of data in the event of a power cut.

Advantages to suit every situation

E3 Performance UPSs are highly adaptable thanks to their many connectors:

• 8 to 9 protected outlets, of which 4 are programmable (according to model). With the programmable outlets, strategic loads and non-critical loads can be controlled easily and independently.
• 2 RJ45 connectors also provide protection for the Tel/ADSL line.
• RS232 and USB communication ports allow remote communication with the various devices connected.

The flexible design of the E3 Performance allows for simplified installation according to user requirements:

• tower position
• rack position

Power factor of 0.9

• Optimum output power factor 0.9
• High level of performance
• High efficiency for critical applications

Versatile rack/tower format

• Two-in-one design for simplified installation
• 2U rack format for easy installation in a 19" server bay (mounting brackets included)
• Tower format (base included)

Communication

In addition to their variety of connectors, E3 Performance UPSs have:

• Local controle capabilities with InfoPower  software (supplied as standard) :
  • • Automatic file closure in the absence of mains power: saving the data of all the computers in a network
    • Intuitive graphic interface: displays system status, the various measurements, event history, etc.
• Network control capabilities via SNMP I Pro agent (available as an option) :
  • • An SNMP slot is provided for connection of an optional SNMP agent and use of the associated software to control the UPS remotely from the network.

User-friendly LCD display

• Precision and user-friendliness: status and parameter values given in real time
• Rotating LCD screen that adapts to tower configuration
• Intuitive display on front panel: direct access to UPS configuration for easier modification of operational modes

Specifications

GENERAL CHARACTERISTICS

• Technology: On Line Performance controlled by microprocessor
• Power: 1100 VA / 990 W
• IEC standard/programmable outlets: 4/4 (10A)
• Tel. / ADSL line protection: RJ45 (1-in/1-out)

PROTECTION & FILERING

• Output form: Pure sinusoidal form
• Protection: Discharge / overload / overvoltage + Tel./ADSL line
• Input protection: Circuit breaker

PHYSICAL CHARACTERISTICS

• Dimensions DxWxH: 425x438x88mm (2U)
• Net weight: 13,4 kg

TECHNICAL INPUT CHARACTERISTICS

• Voltage: 208/220/230/240 VAC
• Frequency range (batt mode): 81-152 VAC
• Frequency: 60/50 Hz (autodetection)

TECHNICAL OUTPUT CHARACTERISTICS

• Voltage: 110-115/120/127 VAC
• AC voltage regulation (Batt mode): +/- 1.5% (before battery alarm)
• Frequency range: 50 Hz or 60 +/- 1 Hz
• Crest factor: 3:1
• Harmonic distorsion: 2% max. @ 100% linear load; 5% max. @ 100% non-linear load (before low battery alarm)

OUTPUT

• ECO mode: 97% 
• Boost & Buck mode: 95%
• Battery mode: 89%

BATTERY

• Max. load current: 1.5 A
• Charge voltage: 27.4 VDC ± 1%
• Recharge time: 90% in 4 hours after a total discharge
• Backup time: From 5 to 30 minutes depending on the connected load

BATTERY CABINETS FOR EXTENDED BACKUP TIME (OPTION)

• Backup time: For extended backup time up to 30 minutes**
• Dimensions - LxWxH: 440x515x88 (2U)
• Net weight: 19.1 kg

INDICATORS & ALARMS

• LCD screen: Mains power supply mode, battery mode, charge level, battery level, input voltage, output voltage, overload, low battery and battery fault
• Alarms: Battery mode, low batteries, overload, fault

COMMUNICATIONS

• Communication ports: USB / RS232
• Communication software: InfoPower (compatible with Windows 2000/2003/XP/2008, Windows 7, 8, 10, Linux, Unix and MAC)
• SNMP I Pro (option): Power management from SNMP (VMware, Hyper V compatible) and from an internet browser 

ENVIRONMENT

• Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
• Noise level: < 45 dB

STANDARDS

• Standard (HV): CE RoHS
• EMC (electromagnetic compatibility): EN62040-2: 2006+AC: 2006 (EN 61000-3-2: 2014, EN61000-4-2:2009, EN61000-4-3:2006+A2: 2010, EN61000-4-4: 2012, EN61000-4-5:
• 2006, EN61000-4-6: 2014, EN61000-4-8: 2010, EN61000 -2-2: 2002)
• Low voltage (safety): EN62040-1:2008+A1:2013

COMMERCIAL INFORMATION

• Warranty: 2 years

High-performance protection

The On Line Performance technology controlled by microprocessor makes the E2 LCD an ideal protection solution thanks to its perfect sinusoidal current and fully protected outlput. It also provides effective protection for particularly sensitive loads such as servers or even video surveillance, telephone switchboards, VOIP etc. In the event of a power cut, E2 LCD offers up to 60 min. of backup time therefore ensuring uninterrupted service or critical data backup.

Smart features

The built-in charger takes only 4 hours to reach maximum backup capacity. When the UPS is not powered up, the cold startup function enables emergency starting of connected hardware. When power is restored the UPS automatically starts up again and does not require any operator input.

Energy saving features

The battery automatically recharges when there is mains power and the UPS is OFF. This feature, available for the whole range, ensures that when connected devices are not in use and the UPS is OFF, the battery continues recharging. Real energy savings are achieved thanks to its advanced battery charger which enables the batteries to charge twice as fast as normal.

Designed for ease of use

• A single On/Off switch

• LCD screen and audible alarms indicating UPS status

Specifications 

• Technology: On Line Performance controlled by microprocessor
• Power: 1500 VA
• Power factor: 0.7
• IEC outputs with backup time: 6
• Tel./ADSL line protection RJ11/45 (1-IN/1-OUT)

PROTECTION & FILTERING

• Output form: Pure sinusoidal
• Protection: Discharge / overload / overvoltage + Tel./ADSL line
• Input protection: Fuse
• Overvoltage protection: Phase-Neutral protection: 1 kV; Phase-Ground & Neutral-Ground protection: 2 kV

PHYSICAL CHARACTERISTICS

• Dimensions (LxWxH): 205 x 146 x 397mm
• Net weight: 11,6 kg 

INPUT TECHNICAL CHARACTERISTICS

• Voltage: 220/230/240 Volt AC
• Voltage range: 162-290 Volt AC
• Frequency: 50/60 Hz (auto-detection)

OUTPUT TECHNICAL CHARACTERISTICS

• Voltage: 220/230/240 Volt AC
• Automatic voltage regulation: ± 10%
• Frequency: 50 or 60 Hz ± 1Hz

BATTERY

• Battery charger: Automatic battery charging upon connection to the mains
• Cold startup (no mains): yes
• Battery type & number: 12 V/9 Ah x 2
• Recharging time: 10 hours at 90% after total discharge
• Backup time: From 12 to 60 min. depending on the connected load

DISPLAY

• LCD screen: Mains power supply mode, battery mode, output charge level, battery level, input voltage, output voltage, overload, fault and battery low

AUDIBLE ALARM

• Battery mode: Sounding every 10 seconds
• Low battery mode: Sounding every second
• Overload: Sounding every half second
• Battery replacement: Sounding every 2 seconds
• Fault: Continuous sounding

COMMUNICATION

• USB communication port: Yes
• RS232 communication port: Yes
• Communication software: InfoPower (supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, 8, Linux, Unix et MAC)

ENVIRONMENT

• Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
• Noise level: < 55 dB

NORMS

• Standard: CE RoHS
• Electromagnetic compatibility: EN 62040-2 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-2-2
• Low voltage safety: EN 62040-1-1 / IEC 60950-1

SALES INFO

• Warranty: 2 years

High-performance protection

The On Line Performance technology controlled by microprocessor makes the E2 LCD an ideal protection solution thanks to its perfect sinusoidal current and fully protected outlput. It also provides effective protection for particularly sensitive loads such as servers or even video surveillance, telephone switchboards, VOIP etc. In the event of a power cut, E2 LCD offers up to 60 min. of backup time therefore ensuring uninterrupted service or critical data backup.

Smart features

The built-in charger takes only 4 hours to reach maximum backup capacity. When the UPS is not powered up, the cold startup function enables emergency starting of connected hardware. When power is restored the UPS automatically starts up again and does not require any operator input.

Energy saving features

The battery automatically recharges when there is mains power and the UPS is OFF. This feature, available for the whole range, ensures that when connected devices are not in use and the UPS is OFF, the battery continues recharging. Real energy savings are achieved thanks to its advanced battery charger which enables the batteries to charge twice as fast as normal.

Designed for ease of use

• A single On/Off switch

• LCD screen and audible alarms indicating UPS status

Specifications 

• Technology: On Line Performance controlled by microprocessor
• Power: 1000 VA
• Power factor: 0.7
• IEC outputs with backup time: 4
• Tel./ADSL line protection RJ11/45 (1-IN/1-OUT)

PROTECTION & FILTERING

• Output form: Pure sinusoidal
• Protection: Discharge / overload / overvoltage + Tel./ADSL line
• Input protection: Fuse
• Overvoltage protection: Phase-Neutral protection: 1 kV; Phase-Ground & Neutral-Ground protection: 2 kV

PHYSICAL CHARACTERISTICS

• Dimensions (LxWxH): 160 x 146 x 350mm
• Net weight: 9 kg 

INPUT TECHNICAL CHARACTERISTICS

• Voltage: 220/230/240 VAC
• Voltage range: [81-145 VAC] or [162-290 VAC]*
• Frequency: 50/60 Hz (auto-detection)

OUTPUT TECHNICAL CHARACTERISTICS

• Voltage: [110-120 VAC] or [220/230/240 VAC]*
• Automatic voltage regulation: ± 10%
• Frequency: 50 or 60 Hz ± 1Hz

BATTERY

• Battery charger: Automatic battery charging upon connection to the mains
• Cold startup (no mains): yes
• Battery type & number: 12 V/7 Ah x 2
• Recharging time: 10 hours at 90% after total discharge
• Backup time: From 12 to 60 min. depending on the connected load

DISPLAY

• LCD screen: Mains power supply mode, battery mode, output charge level, battery level, input voltage, output voltage, overload, fault and battery low

AUDIBLE ALARM

• Battery mode: Sounding every 10 seconds
• Low battery mode: Sounding every second
• Overload: Sounding every half second
• Battery replacement: Sounding every 2 seconds
• Fault: Continuous sounding

COMMUNICATION

• USB communication port: Yes
• RS232 communication port: No
• Communication software: InfoPower (supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, 8, Linux, Unix et MAC)

ENVIRONMENT

• Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
• Noise level: < 45 dB

NORMS

• Standard: CE RoHS
• Electromagnetic compatibility: EN 62040-2 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-2-2
• Low voltage safety: EN 62040-1-1 / IEC 60950-1

SALES INFO

• Warranty: 2 years

The main specifications and functions are as follows:

• 10/100 Mb Ethernet connection (RJ45)
• UPS monitoring screen via a web navigator
• Remote shutdown of PC's
• Notification of faults via e-mail to up to 8 addresses
• UPS management by SNMP protocol
• Diagnostic via modem and e.service
• Monitoring of the operating environment (optional EMD temperature and humidity sensor) 
• Configurable alarm trigger with e-mail notification
   

Starting from NV 7.20, all our UPS are now 'IoT Ready'. Connecting to SOCOMEC Cloud Applications, you can get all advantages of SOCOMEC digital services, such as UPS monitoring on your smart phone, and remote maintenance contract.
 

Net Vision is compatible with UPS models of the following series:
- ITYS
- ITYS PRO
- NETYS PR-RT
- MASTERYS GP - EM - IP+ -BC+ - GP4
- MASTERYS BC (only from 2016 production)
- DELPHYS BC - GP - MP - MX - EM
- MODULYS GP2.0 - RM GP - XL - XS

Features

• UPS management by SNMP
• Remote shutdown of PC's
• E-mail notification of faults
• UPS monitoring screen