+32 9 420 21 00     info@belgosat.com
info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Power

Display:
 


Loading...
COBHAM 19

COBHAM 19" Rack Mounting Kit for SAILOR 6080 AC/DC Power Supply

19" rack mounting kit for SAILOR 6080 AC/DC power supply.

€ 260,69
In stock
COBHAM 19

COBHAM 19" Rack Mounting Kit for SAILOR 6080 AC/DC Power Supply

€ 260,69

19" rack mounting kit for SAILOR 6080 AC/DC power supply.

COBHAM SAILOR 6080 AC/DC Power Supply 300W/28V DC

COBHAM SAILOR 6080 AC/DC Power Supply 300W/28V DC

New from Thrane & Thrane the SAILOR FleetBroadband 150 is the most compact solution to offer true global IP data and high quality voice to a wide range of vessels.

€ 580,45
In stock
COBHAM SAILOR 6080 AC/DC Power Supply 300W/28V DC

COBHAM SAILOR 6080 AC/DC Power Supply 300W/28V DC

€ 580,45

 
The SAILOR 6081 Power Supply can deliver 300 W output power on average with a peak of 370 W for max. 2 minutes (10% duty cycle).This is useful for MF/HF applications and DSC transmissions of short duration.

The SAILOR 6081 Power Supply is AC powered with a battery switch-over function and has an on/off switch which is lit when the power is turned on. All connectors are placed at the same end of the power supply to simplify mounting and installation. The connector panel is protected by a transparent lid. To secure an installation with heavy cables a cable-relief bracket can be installed.

It features the following items:
- Two DC connectors, output, range: 28.7 V - 31.2 V
- Output power 300 W continuous, 370 W peak (max. 2 min., 10% duty cycle, 100-240 VAC) or 270 W continuous, 333 W peak (max. 2 min., 10% duty cycle, 90-100 VAC)
- Daisy-chaining of up to four units to give up to 1480 W.1
- AC input (100-240 VAC operating) with fuse (6.3 A) with Power Factor Correction
- Automatic detection of input voltage range  AC alarm and Short circuit protection
- Over-temperature protection (shutdown with automatic restart)
- Switch over to battery power in case of AC supply failure
- On/off switch  IP 30 protection
- Approval and certification: IEC 60945 approval
 
 

COBHAM SAILOR 6081 Power Supply incl. Charger and Tray for wall mounting 300W/28V DC

COBHAM SAILOR 6081 Power Supply incl. Charger and Tray for wall mounting 300W/28V DC

The new SAILOR 6081 Power Supply Unit and Charger is a true modular power supply and charger that offers unrivaled flexibility in installation and operation of SAILOR...

€ 1.220,50
In stock
COBHAM SAILOR 6081 Power Supply incl. Charger and Tray for wall mounting 300W/28V DC

COBHAM SAILOR 6081 Power Supply incl. Charger and Tray for wall mounting 300W/28V DC

€ 1.220,50

The new SAILOR 6081 Power Supply Unit and Charger is a true modular power supply and charger that offers unrivaled flexibility in installation and operation of SAILOR communications products.

The high quality SAILOR 6081 is based on the proven standalone SAILOR 6080 Power Supply and has been developed as part of the SAILOR 6000 Series. The SAILOR 6081 PSU and Charger is a highly advanced and sophisticated power supply and charger, designed to power the most advanced and user friendly safety communication system available, the SAILOR 6000 Series.

The SAILOR 6081 PSU and Charger provides a number of advanced features including:

  • Battery status on the SAILOR 6018 Message Terminal First truly modular maritime Power Supply and Charger system
  • No fan = no moving parts
  • Flexible mounting options and easy installation
  • LAN connection
The SAILOR 6081 PSU and Charger brings with it innovations not seen before on a power supply and charger of its size.
It features:
  • a LAN port on the charger module allowing monitoring and control of the SAILOR 6081 remotely
  • on the bridge via the SAILOR 6018 Message Terminal
  •  a SAILOR 6000 GMDSS Series installation, meaning that there is no requirement for a battery panel.

COBHAM SAILOR N163S Power Supply, 110/220V AC to 24V DC,7A Black grey

COBHAM SAILOR N163S Power Supply, 110/220V AC to 24V DC,7A Black grey

The Thrane & Thrane SAILOR N163S Power Supply is a sturdy and reliable work horse, featuring automatic change-over from AC mains to 24V DC, ensuring continued power.

€ 315,20
In stock
COBHAM SAILOR N163S Power Supply, 110/220V AC to 24V DC,7A Black grey

COBHAM SAILOR N163S Power Supply, 110/220V AC to 24V DC,7A Black grey

€ 315,20

The Thrane & Thrane SAILOR N163S Power Supply is a sturdy and reliable work horse, featuring automatic change-over from AC mains to 24V DC, ensuring continued power. The SAILOR N163S Power Supply is recommended for the following SAILOR products from Thrane & Thrane:

  • All VHF radios
  • AIS
  • Inmarsat-C GMDSS
  • Inmarsat mini-C
  • Inmarsat mini-M
  • SSAS systems
  • Iridium

SAILOR N163S Power Supply Includes:

  • 1 x Thrane Sailor N163S Power Supply Unit
  • 2 x 1.5mm2 Power Supply Wire Cables(for 110VAC)
  • 2 x 0.7mm2 Power Supply Wire Cables(for 220VAC)
  • 2 x 6.0mm2 Power Supply Wire Cables(for 24VDC)
  • Quick Start Guide
  • Instruction Manual

COBHAM Tray for wall mounting of SAILOR 6080 AC/DC Power Supply 300W/28V DC

COBHAM Tray for wall mounting of SAILOR 6080 AC/DC Power Supply 300W/28V DC

Tray for wall mounting the SAILOR 6080 AC/DC Power Supply on its own as a single unit, or you can daisy-chain and stack up to 3 units.

€ 93,05
In stock
COBHAM Tray for wall mounting of SAILOR 6080 AC/DC Power Supply 300W/28V DC

COBHAM Tray for wall mounting of SAILOR 6080 AC/DC Power Supply 300W/28V DC

€ 93,05

Tray for wall mounting the SAILOR 6080 AC/DC Power Supply on its own as a single unit, or you can daisy-chain and stack up to 3 units.

The AC/DC Power Supply can also be fitted in a 1 U rack mount. This tray is for the SAILOR 6080 AC/DC Power Supply and is designed to be used with BGAN-X and FleetBroadband terminals.

Provides IP X2 rating for the Power Supply when mounted vertically on a wall.

Stacking SAILOR 6080 Power Supply units

You can mount up to three 6080 AC/DC Power Supply units in a vertical (recommended to use the Wall Mounting Tray and cable-relief bracket, heavy duty, order number: Part# 406080A-001) or horizontal position.

When mounted in a vertical position, with the connector panel pointing downwards, the unit fulfills IP32 in areas with more than 42 V and IP22 in other areas.

The mounting holes in the AC/DC Power Supply are designed in such a way that units fit nicely on top of each other when being stacked.

IMPORTANT NOTE
To ensure adequate cooling of the AC/DC Power Supplies an unobstructed space of minimum 5 cm must be maintained around all sides of the group of units (except between the units and the bottom side).

INFOSEC 1100VA UPS ON LINE PERFORMANCE 2U

INFOSEC 1100VA UPS ON LINE PERFORMANCE 2U

E3 Performance UPSs are dedicated to the electrical protection of IT networks and environments. With high-quality sinusoidal current output and variety of connectors, they are...

€ 475,00
In stock
INFOSEC 1100VA UPS ON LINE PERFORMANCE 2U

INFOSEC 1100VA UPS ON LINE PERFORMANCE 2U

€ 475,00

High-performance protection

Equipped with microprocessor-controlled On Line Performance technology, the E3 Performance range offers perfect protection to IT networks and loads. It supplies sinewave current, and its high output power factor (0.9) provides appropriate protection to servers and other IT equipment. The E3 Performance UPS guarantees uninterrupted service and the  safeguarding of data in the event of a power cut.

 

Advantages to suit every situation

E3 Performance UPSs are highly adaptable thanks to their many connectors:

  • 8 to 9 protected outlets, of which 4 are programmable (according to model). With the programmable outlets, strategic loads and non-critical loads can be controlled easily and independently.
  • 2 RJ45 connectors also provide protection for the Tel/ADSL line.
  • RS232 and USB communication ports allow remote communication with the various devices connected.

The flexible design of the E3 Performance allows for simplified installation according to user requirements:

  • tower position
  • rack position

Power factor of 0.9

  • Optimum output power factor 0.9
  • High level of performance
  • High efficiency for critical applications

Versatile rack/tower format

  • Two-in-one design for simplified installation
  • 2U rack format for easy installation in a 19" server bay (mounting brackets included)
  • Tower format (base included)

Communication

In addition to their variety of connectors, E3 Performance UPSs have:

  • Local controle capabilities with InfoPower  software (supplied as standard) :
      • Automatic file closure in the absence of mains power: saving the data of all the computers in a network
      • Intuitive graphic interface: displays system status, the various measurements, event history, etc.
  • Network control capabilities via SNMP I Pro agent (available as an option) :
      • An SNMP slot is provided for connection of an optional SNMP agent and use of the associated software to control the UPS remotely from the network.

User-friendly LCD display

  • Precision and user-friendliness: status and parameter values given in real time
  • Rotating LCD screen that adapts to tower configuration
  • Intuitive display on front panel: direct access to UPS configuration for easier modification of operational modes

Specifications

GENERAL CHARACTERISTICS

  • Technology: On Line Performance controlled by microprocessor
  • Power: 1100 VA / 990 W
  • IEC standard/programmable outlets: 4/4 (10A)
  • Tel. / ADSL line protection: RJ45 (1-in/1-out)

PROTECTION & FILERING

  • Output form: Pure sinusoidal form
  • Protection: Discharge / overload / overvoltage + Tel./ADSL line
  • Input protection: Circuit breaker

PHYSICAL CHARACTERISTICS

  • Dimensions DxWxH: 425x438x88mm (2U)
  • Net weight: 13,4 kg

TECHNICAL INPUT CHARACTERISTICS

  • Voltage: 208/220/230/240 VAC
  • Frequency range (batt mode): 81-152 VAC
  • Frequency: 60/50 Hz (autodetection)

TECHNICAL OUTPUT CHARACTERISTICS

  • Voltage: 110-115/120/127 VAC
  • AC voltage regulation (Batt mode): +/- 1.5% (before battery alarm)
  • Frequency range: 50 Hz or 60 +/- 1 Hz
  • Crest factor: 3:1
  • Harmonic distorsion: 2% max. @ 100% linear load; 5% max. @ 100% non-linear load (before low battery alarm)

OUTPUT

  • ECO mode: 97% 
  • Boost & Buck mode: 95%
  • Battery mode: 89%

BATTERY

  • Max. load current: 1.5 A
  • Charge voltage: 27.4 VDC ± 1%
  • Recharge time: 90% in 4 hours after a total discharge
  • Backup time: From 5 to 30 minutes depending on the connected load

BATTERY CABINETS FOR EXTENDED BACKUP TIME (OPTION)

  • Backup time: For extended backup time up to 30 minutes**
  • Dimensions - LxWxH: 440x515x88 (2U)
  • Net weight: 19.1 kg

INDICATORS & ALARMS

  • LCD screen: Mains power supply mode, battery mode, charge level, battery level, input voltage, output voltage, overload, low battery and battery fault
  • Alarms: Battery mode, low batteries, overload, fault

COMMUNICATIONS

  • Communication ports: USB / RS232
  • Communication software: InfoPower (compatible with Windows 2000/2003/XP/2008, Windows 7, 8, 10, Linux, Unix and MAC)
  • SNMP I Pro (option): Power management from SNMP (VMware, Hyper V compatible) and from an internet browser 

ENVIRONMENT

  • Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
  • Noise level: < 45 dB

STANDARDS

  • Standard (HV): CE RoHS
  • EMC (electromagnetic compatibility): EN62040-2: 2006+AC: 2006 (EN 61000-3-2: 2014, EN61000-4-2:2009, EN61000-4-3:2006+A2: 2010, EN61000-4-4: 2012, EN61000-4-5:
  • 2006, EN61000-4-6: 2014, EN61000-4-8: 2010, EN61000 -2-2: 2002)
  • Low voltage (safety): EN62040-1:2008+A1:2013

COMMERCIAL INFORMATION

  • Warranty: 2 years

INFOSEC SINE WAVE OUTPUT 1000VA UPS ONLINE - USB PORT

INFOSEC SINE WAVE OUTPUT 1000VA UPS ONLINE - USB PORT

Prevent your computer or other electronic device to power off immediately by protecting and backup your power supply with this UPS

€ 420,00
In stock
INFOSEC SINE WAVE OUTPUT 1000VA UPS ONLINE - USB PORT

INFOSEC SINE WAVE OUTPUT 1000VA UPS ONLINE - USB PORT

€ 420,00

High-performance protection

The On Line Performance technology controlled by microprocessor makes the E2 LCD an ideal protection solution thanks to its perfect sinusoidal current and fully protected outlput. It also provides effective protection for particularly sensitive loads such as servers or even video surveillance, telephone switchboards, VOIP etc. In the event of a power cut, E2 LCD offers up to 60 min. of backup time therefore ensuring uninterrupted service or critical data backup.

 

Smart features

The built-in charger takes only 4 hours to reach maximum backup capacity. When the UPS is not powered up, the cold startup function enables emergency starting of connected hardware. When power is restored the UPS automatically starts up again and does not require any operator input.

 

Energy saving features

The battery automatically recharges when there is mains power and the UPS is OFF. This feature, available for the whole range, ensures that when connected devices are not in use and the UPS is OFF, the battery continues recharging. Real energy savings are achieved thanks to its advanced battery charger which enables the batteries to charge twice as fast as normal.

 

Designed for ease of use

• A single On/Off switch

• LCD screen and audible alarms indicating UPS status

Specifications 

  • Technology: On Line Performance controlled by microprocessor
  • Power: 1000 VA
  • Power factor: 0.7
  • IEC outputs with backup time: 4
  • Tel./ADSL line protection RJ11/45 (1-IN/1-OUT)

PROTECTION & FILTERING

  • Output form: Pure sinusoidal
  • Protection: Discharge / overload / overvoltage + Tel./ADSL line
  • Input protection: Fuse
  • Overvoltage protection: Phase-Neutral protection: 1 kV; Phase-Ground & Neutral-Ground protection: 2 kV

PHYSICAL CHARACTERISTICS

  • Dimensions (LxWxH): 160 x 146 x 350mm
  • Net weight: 9 kg 

INPUT TECHNICAL CHARACTERISTICS

  • Voltage: 220/230/240 VAC
  • Voltage range: [81-145 VAC] or [162-290 VAC]*
  • Frequency: 50/60 Hz (auto-detection)

OUTPUT TECHNICAL CHARACTERISTICS

  • Voltage: [110-120 VAC] or [220/230/240 VAC]*
  • Automatic voltage regulation: ± 10%
  • Frequency: 50 or 60 Hz ± 1Hz

BATTERY

  • Battery charger: Automatic battery charging upon connection to the mains
  • Cold startup (no mains): yes
  • Battery type & number: 12 V/7 Ah x 2
  • Recharging time: 10 hours at 90% after total discharge
  • Backup time: From 12 to 60 min. depending on the connected load

DISPLAY

  • LCD screen: Mains power supply mode, battery mode, output charge level, battery level, input voltage, output voltage, overload, fault and battery low

AUDIBLE ALARM

  • Battery mode: Sounding every 10 seconds
  • Low battery mode: Sounding every second
  • Overload: Sounding every half second
  • Battery replacement: Sounding every 2 seconds
  • Fault: Continuous sounding

COMMUNICATION

  • USB communication port: Yes
  • RS232 communication port: No
  • Communication software: InfoPower (supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, 8, Linux, Unix et MAC)

ENVIRONMENT

  • Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
  • Noise level: < 45 dB

NORMS

  • Standard: CE RoHS
  • Electromagnetic compatibility: EN 62040-2 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-2-2
  • Low voltage safety: EN 62040-1-1 / IEC 60950-1

SALES INFO

  • Warranty: 2 years

INFOSEC SINE WAVE OUTPUT 1500VA UPS ONLINE - USB PORT

INFOSEC SINE WAVE OUTPUT 1500VA UPS ONLINE - USB PORT

Prevent your computer or other electronic device to power off immediately by protecting and backup your power supply with this UPS

€ 520,00
In stock
INFOSEC SINE WAVE OUTPUT 1500VA UPS ONLINE - USB PORT

INFOSEC SINE WAVE OUTPUT 1500VA UPS ONLINE - USB PORT

€ 520,00

High-performance protection

The On Line Performance technology controlled by microprocessor makes the E2 LCD an ideal protection solution thanks to its perfect sinusoidal current and fully protected outlput. It also provides effective protection for particularly sensitive loads such as servers or even video surveillance, telephone switchboards, VOIP etc. In the event of a power cut, E2 LCD offers up to 60 min. of backup time therefore ensuring uninterrupted service or critical data backup.

 

Smart features

The built-in charger takes only 4 hours to reach maximum backup capacity. When the UPS is not powered up, the cold startup function enables emergency starting of connected hardware. When power is restored the UPS automatically starts up again and does not require any operator input.

 

Energy saving features

The battery automatically recharges when there is mains power and the UPS is OFF. This feature, available for the whole range, ensures that when connected devices are not in use and the UPS is OFF, the battery continues recharging. Real energy savings are achieved thanks to its advanced battery charger which enables the batteries to charge twice as fast as normal.

 

Designed for ease of use

• A single On/Off switch

• LCD screen and audible alarms indicating UPS status

 

Specifications 

  • Technology: On Line Performance controlled by microprocessor
  • Power: 1500 VA
  • Power factor: 0.7
  • IEC outputs with backup time: 6
  • Tel./ADSL line protection RJ11/45 (1-IN/1-OUT)

PROTECTION & FILTERING

  • Output form: Pure sinusoidal
  • Protection: Discharge / overload / overvoltage + Tel./ADSL line
  • Input protection: Fuse
  • Overvoltage protection: Phase-Neutral protection: 1 kV; Phase-Ground & Neutral-Ground protection: 2 kV

PHYSICAL CHARACTERISTICS

  • Dimensions (LxWxH): 205 x 146 x 397mm
  • Net weight: 11,6 kg 

INPUT TECHNICAL CHARACTERISTICS

  • Voltage: 220/230/240 Volt AC
  • Voltage range: 162-290 Volt AC
  • Frequency: 50/60 Hz (auto-detection)

OUTPUT TECHNICAL CHARACTERISTICS

  • Voltage: 220/230/240 Volt AC
  • Automatic voltage regulation: ± 10%
  • Frequency: 50 or 60 Hz ± 1Hz

BATTERY

  • Battery charger: Automatic battery charging upon connection to the mains
  • Cold startup (no mains): yes
  • Battery type & number: 12 V/9 Ah x 2
  • Recharging time: 10 hours at 90% after total discharge
  • Backup time: From 12 to 60 min. depending on the connected load

DISPLAY

  • LCD screen: Mains power supply mode, battery mode, output charge level, battery level, input voltage, output voltage, overload, fault and battery low

AUDIBLE ALARM

  • Battery mode: Sounding every 10 seconds
  • Low battery mode: Sounding every second
  • Overload: Sounding every half second
  • Battery replacement: Sounding every 2 seconds
  • Fault: Continuous sounding

COMMUNICATION

  • USB communication port: Yes
  • RS232 communication port: Yes
  • Communication software: InfoPower (supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, 8, Linux, Unix et MAC)

ENVIRONMENT

  • Ideal environment: 0-40°C, 0-90% relative humidity (without condensation)
  • Noise level: < 55 dB

NORMS

  • Standard: CE RoHS
  • Electromagnetic compatibility: EN 62040-2 / IEC 61000-4-2 / IEC 61000-4-3 / IEC 61000-4-4 / IEC 61000-4-5 / IEC 61000-2-2
  • Low voltage safety: EN 62040-1-1 / IEC 60950-1

SALES INFO

  • Warranty: 2 years

Socomec Net Vision 7 Card

Socomec Net Vision 7 Card

Net Vision is a communication and management interface designed for business networks. The UPS behaves exactly like a networked peripheral, it can be managed remotely and can...

€ 249,00
In stock
Socomec Net Vision 7 Card

Socomec Net Vision 7 Card

€ 249,00

The main specifications and functions are as follows:

  • 10/100 Mb Ethernet connection (RJ45)
  • UPS monitoring screen via a web navigator
  • Remote shutdown of PC's
  • Notification of faults via e-mail to up to 8 addresses
  • UPS management by SNMP protocol
  • Diagnostic via modem and e.service
  • Monitoring of the operating environment (optional EMD temperature and humidity sensor) 
  • Configurable alarm trigger with e-mail notification
     

Starting from NV 7.20, all our UPS are now 'IoT Ready'. Connecting to SOCOMEC Cloud Applications, you can get all advantages of SOCOMEC digital services, such as UPS monitoring on your smart phone, and remote maintenance contract.
 

Net Vision is compatible with UPS models of the following series:
- ITYS
- ITYS PRO
- NETYS PR-RT
- MASTERYS GP - EM - IP+ -BC+ - GP4
- MASTERYS BC (only from 2016 production)
- DELPHYS BC - GP - MP - MX - EM
- MODULYS GP2.0 - RM GP - XL - XS

Features

  • UPS management by SNMP
  • Remote shutdown of PC's
  • E-mail notification of faults
  • UPS monitoring screen

Socomec NETYS RT-M 1100VA - 900W - Single Phase 220V

Socomec NETYS RT-M 1100VA - 900W - Single Phase 220V

Single phase, 230V DNV-GL certified marine UPS, 1100VA, 900W

€ 480,00
In stock
Socomec NETYS RT-M 1100VA - 900W - Single Phase 220V

Socomec NETYS RT-M 1100VA - 900W - Single Phase 220V

€ 480,00

NETYS RT-M

Solution for marine applications
Single/single phase UPS 1100VA

The solution for

• Steering systems
• Bridge systems
• Radar systems
• Control systems
• Video surveillance systems

High availability in marine environments

The marine industry calls for reliable equipment which is able to supply applications operating in harsh environments. In such a context, power outages cause extremely serious problems to critical equipment for the navigation system, and communication and engine controls, which leads to costs increasing. In line with the company’s commitment to develop innovative solutions to ensure availability, improve energy efficiency and reduce costs, SOCOMEC has introduced NETYS RT-M, high-performance UPS DNV GL standard certified.

Easy to use

• Easy configurable frequency converter operation (50 Hz, 60 Hz).
• No configuration necessary on first startup.
• Wide range of communication protocols (including TCP/IP and SNMP) for integration into LAN networks or building management systems (BMS).

Meets practical needs

• Online double conversion technology with sinusoidal waveform, to completely filter out all disturbances from / to the mains power supply and to ensure maximum protection of the equipment.
• Optional battery extension modules (EBM) to meet wide back-up time requirements, even after installation.
• Clear and uncluttered LCD interface, with buzzers that immediately indicate the operating status of the UPS, even for less specialist users.

Socomec NETYS RT-M 1700VA - 1350W - Single Phase 220V

Socomec NETYS RT-M 1700VA - 1350W - Single Phase 220V

Single phase, 230V DNV-GL certified marine UPS, 1700VA, 1350W

€ 630,00
In stock
Socomec NETYS RT-M 1700VA - 1350W - Single Phase 220V

Socomec NETYS RT-M 1700VA - 1350W - Single Phase 220V

€ 630,00

NETYS RT-M

Solution for marine applications
Single/single phase UPS 1700VA

The solution for

• Steering systems
• Bridge systems
• Radar systems
• Control systems
• Video surveillance systems

High availability in marine environments

The marine industry calls for reliable equipment which is able to supply applications operating in harsh environments. In such a context, power outages cause extremely serious problems to critical equipment for the navigation system, and communication and engine controls, which leads to costs increasing. In line with the company’s commitment to develop innovative solutions to ensure availability, improve energy efficiency and reduce costs, SOCOMEC has introduced NETYS RT-M, high-performance UPS DNV GL standard certified.

Easy to use

• Easy configurable frequency converter operation (50 Hz, 60 Hz).
• No configuration necessary on first startup.
• Wide range of communication protocols (including TCP/IP and SNMP) for integration into LAN networks or building management systems (BMS).

Meets practical needs

• Online double conversion technology with sinusoidal waveform, to completely filter out all disturbances from / to the mains power supply and to ensure maximum protection of the equipment.
• Optional battery extension modules (EBM) to meet wide back-up time requirements, even after installation.
• Clear and uncluttered LCD interface, with buzzers that immediately indicate the operating status of the UPS, even for less specialist users.

Socomec NETYS RT-M 2200VA - 1800W - Single Phase 220V

Socomec NETYS RT-M 2200VA - 1800W - Single Phase 220V

The marine industry calls for reliable equipment which is able to supply applications operating in harsh environments. In such a context, power outages cause extremely serious...

€ 760,00
Extra delivery time
Socomec NETYS RT-M 2200VA - 1800W - Single Phase 220V

Socomec NETYS RT-M 2200VA - 1800W - Single Phase 220V

€ 760,00

NETYS RT-M

Solution for marine applications
Single/single phase UPS 2200VA

The solution for

• Steering systems
• Bridge systems
• Radar systems
• Control systems
• Video surveillance systems

High availability in marine environments

The marine industry calls for reliable equipment which is able to supply applications operating in harsh environments. In such a context, power outages cause extremely serious problems to critical equipment for the navigation system, and communication and engine controls, which leads to costs increasing. In line with the company’s commitment to develop innovative solutions to ensure availability, improve energy efficiency and reduce costs, SOCOMEC has introduced NETYS RT-M, high-performance UPS DNV GL standard certified.

Easy to use

• Easy configurable frequency converter operation (50 Hz, 60 Hz).
• No configuration necessary on first startup.
• Wide range of communication protocols (including TCP/IP and SNMP) for integration into LAN networks or building management systems (BMS).

Meets practical needs

• Online double conversion technology with sinusoidal waveform, to completely filter out all disturbances from / to the mains power supply and to ensure maximum protection of the equipment.
• Optional battery extension modules (EBM) to meet wide back-up time requirements, even after installation.
• Clear and uncluttered LCD interface, with buzzers that immediately indicate the operating status of the UPS, even for less specialist users.


Filter
0
Unlimited
This Website uses both functional as non-functional cookies. For the placement and reading of non-functional cookies we need your prior consent; this is not the case for functional cookies. You can alter the use of cookies later by changing your preferences. You can find more info in our Cookie policy.